Printer Support World is an Independent Online Technical and Software Support Provider.
We are not associated to any Brands. All images and brand names if used are for reference purpose only.

Call +1-877-717-6111 to Fix HP General Printer Error Code 0x10000F6

Error Code ‘0x610000f6’ Message Displays for HP Photosmart Plus All-in-One Printers (B209a, B209b, and B209c)

Caution: This Solution require making changes to your Printer and Computer Settings and so may require technical expertise. It is advised to call our Printer Support Helpline on  +1-877-717-6111 and talk to our Printer Support Expert who will guide you to fix the problems with your Printer.

Issue

The error code ‘0x610000f6‘ message displays on the control panel, and the HP Printer does not print when a print command is given.

Solutions

Try the following solutions in the order presented to resolve the issue. When one of the solutions resolves the issue, there is no need to continue troubleshooting.

1) Restart the HP Printer.

  1. Press the Power button to turn off the product. If the printer does not turn off, continue to the next solution.
  2. Wait 60 seconds.
  3. Press the Power button to turn on the printer.
  • If these steps resolved the issue, you do not need to continue troubleshooting. If the issue exists, continue to the next solution.

2) Clear any jammed paper

Jammed paper can cause the carriage to stall. Follow these steps to clear a paper jam.

– Remove any loose paper

CAUTION: Do not remove jammed paper at this stage. Trying to clear jammed paper from the front of the product can damage the print mechanism.

– Clear the paper jam

Use the following steps to check for and remove jammed paper from the back of the printer.

  1. Press the Power button to turn off the product.
  2. Disconnect the power cord from the back of the product.
  3. Push the buttons on either side of the rear access panel, and then pull the panel away from the product.
  4. Gently pull the paper out of the rollers.   CAUTION: If the paper tears while removing it from the rollers, check the rollers and wheels for torn pieces of paper that might remain inside the product. If any torn pieces of paper remain inside the product, more paper jams are likely to occur.
  5. Reattach the rear access panel. Gently push the door forward until it snaps into place.
  6. Reconnect the power cord to the back of the printer.
  7. Press the Power button to turn on the printer.
  • If these steps resolved the issue, there is no need to continue troubleshooting. If the issue persists, see the next step.

– Open the top cover, and then clear the paper jam

Use the following steps to open the top cover, and then clear the paper jam.

  1. Press the Power button to turn off the printer.
  2. Disconnect the power cord from the back of the printer.
  3. Open the cartridge access door.
  4. Manually move the carriage to one side of the Printer.
  5. If there is paper jammed in the product, gently remove the paper through the top of the printer. WARNING: Do not reach into the device when it is on and the carriage is stuck as this could cause an electrical shock. Always turn the printer off before you remove any paper jam.
  6. Close the cartridge access door.
  7. Press the Power button to turn on the HP Printer.
  8. Try printing again and see if the issue is resolved.
  • If these steps resolved the issue, you do not need to continue troubleshooting. If the issue persists, continue to the next solution.

3) Make sure that the carriage moves freely

Follow these steps to make sure that the carriage moves freely.

  1. Disconnect the power cord and the USB cable from the back of the printer. 
  2. Open the cartridge access door.
  3. Press down firmly on the carriage latch handle to close it completely. NOTE: If the latch handle is up, it results in incorrectly seated cartridges and the printer does not function correctly.
  4. Check whether the carriage can move freely from one side of the printer to the other. Apply moderate pressure to one side of the carriage, and then push it back and forth in the printer.   WARNING: Please disconnect the power cord to move parts manually without the risk of an electrical shock.
  • If these steps resolved the issue, you do not need to continue troubleshooting. If the issue still exists, continue to the next solution.

4) Reinstall the cartridges

The product might indicate a carriage jam error if a cartridge is not installed correctly. Follow these steps to make sure that the cartridges are installed correctly.

– Remove the cartridges

Use these steps to remove the cartridges.

  1. Make sure that the printer is turned on.
  2. Use the access handles on the sides of the product to open the cartridge access door. NOTE: Wait until the carriage is idle and silent before proceeding.
  3. Press the tab on each cartridge, and then remove each cartridge from its slot.

Step two: Reinstall the cartridges

Use these steps to reinstall the cartridges.

  1. Slide each cartridge into its empty slot until it clicks into place and seats firmly in the slot. Make sure that the icon on each cartridge matches the shape and color of the icon on the slot you are inserting the cartridge into.
  2. Close the cartridge access door.
  3. Try printing again.
  • If these steps resolved the issue, you do not need to continue troubleshooting. If the issue persists, continue to the next solution.

5) Plug the product directly into a wall socket

Plug the product directly into a wall outlet to make sure the power source is functioning correctly.

  1. Disconnect the power cord from the back of the printer.
  2. Disconnect the power cord from any power strips or surge suppressors, and then plug it directly into a wall outlet.
  3. Reconnect the power cord to the back of the printer.
  4. Try printing again.NOTE: If the printer prints when plugged directly into a wall outlet, the power strip or surge protector might not be allowing enough voltage to reach the printer.
  • If these steps resolved the issue, you do not need to continue troubleshooting. If the issue persists, continue to the next solution.

6) Reset the printer, and then print a status report

– Reset the printer

Use these steps to reset the printer

  1. Press the Power button () to turn off the product.
  2. Disconnect the USB cable from the product.
  3. Disconnect the power cord from the product, and then wait 60 seconds.
  4. Unplug the power cord from the wall outlet.
  5. Plug the power cord back into the wall outlet.
  6. Reconnect the power cord to the back of the product.
  7. Press the Power button () to turn on the product.
  8. Reconnect the USB cable to the back of the product, and then reconnect it securely to the product.

– Print a status report

Use the following steps to print a status report from the product control panel.

  1. Load plain white paper in the input tray.
  2. On the control panel Home Screen, touch the right arrow to view more options.
  3. Touch Setup.
  4. Touch Tools.
  5. Touch Printer Status Report. The status report prints.
  • If these steps resolved the issue, you do not need to continue troubleshooting. If the issue persists, continue to the next solution.

Solution seven: Service the product.

Call our Printer Support Helpline on +1-877-717-6111 if the above steps do not help you fix your HP Printer Error Code 0xC19AC129. You many need more expert help.

Related Articles and Reference Websites: