ensure cartridge is totally lockup into place and cartridge’s plastic tabs unit of dimension correctly aligned. use warning not to bend the tab out relatively one.27 cm (0.Five inches). Moving the tab too methodmay damage the cartridge or reason the tab to break off.
2) The error situation is moreover brought about by means of a slipped or skew chip factor. subtract the refilled cartridges and read about cartridge’s good chip for correct placement and alignment. If chip place glance flawed, come cartridge in your re-filler for research and/or chip alternative.
3) the mattercould even be brought about by means of a damaged chip (see ikon underneath of a damaged chip that led to associateextremely cartridge error situation). ensure no DEEP scratches unit of dimension visual on chip surfaces. come cartridge to replenish laboratory if this situation is reward.
4) Reset the Printer:
From the printer’s major menu, go for (Note: printer buttons received’t be illuminated):
Inside the Service Menu, realize the Resets Menu, go for Semi-Full Reset to reset the printer.
5) Install tiropower unit authentic 934/935 cartridges to completely rule out the refilled cartridge/chip detection factor.
6) If the mistake situation continues, come to ink replenish laboratory ANd request to own the cartridge’s chip evaluated related request to own the cartridge weighed to ensure it’s an good enough quantity of ink within (i.e. if air is eaten into the interior PRINT HEAD this couldgenerally reason a ‘Printhead Failure’ error situation, or identical).
7) If realizable, carry out the next steps to visualise if the mistake state is cleared:
a. go for PRINTER MAINTENANCE and elect CLEAN PRINT HEAD. Check to visualise if the print high quality take a look at print is generated / fortunate.
b. If affiliate introduced printer menu possibility, go for ALIGN PRINT HEAD to calibrate the print head. If fortunate, then carry out a print take a look at with a undeniable file (by means of laptop).